Curved Traffic Sign Frame Leg | DuraGal Steel
Quick Description
Curved traffic sign frame leg sold individually, made from SHS20x20x1.6 DuraGal steel with cold gal finished weld area, 1110mm total width, 300mm stem and 1.7kg weight.Curved Traffic Sign Frame Leg supports portable traffic sign frame setups used by traffic control crews, civil contractors, utility works crews and council maintenance teams. It is used with compatible sign frames to hold temporary traffic messages in roadside, worksite access, lane closure and detour setups.
The leg stand slot into the base of a compatible sign frame to support the frame in position during site setup. Crews can deploy the frame and legs during advance warning, instruction or detour sign placement, then remove and stack the legs during pack-down for transport back to the traffic control vehicle.
The 1110mm total width provides a broad support footprint for portable sign frame use, while the 300mm stem inserts into the frame leg receiver. The curved leg ends help the stand sit cleanly when placed on sealed surfaces, shoulders or prepared roadside areas as part of temporary traffic management setups.
Manufactured from SHS20x20x1.6 DuraGal steel, with the weld area finished in cold gal after fabrication, this leg is built for repeated handling, loading, unloading and roadside deployment. The 1.7kg weight keeps the leg practical for crews moving multiple frames and legs during short-term traffic control works.
This leg is used with compatible UAGS sign frames, including these Traffic Control Sign Frames, where portable roadside sign setups are required for temporary traffic control.
Common use includes roadworks, utility maintenance, civil construction, council works and event traffic control where signs need to be positioned, checked, relocated and packed down as the site changes.
(Y-LEG-CURVED-DG)
This product is supplied by UAG Services Pty Ltd and is covered by a six (6) month warranty against defects in materials and workmanship under normal use conditions.
This warranty covers manufacturing faults present at the time of supply or faults that become evident during normal intended use. It does not cover damage caused by impact, bending, twisting, dragging, being driven into, contact with vehicles or machinery, incorrect handling, poor storage, unauthorised modification, vandalism, theft, site abuse, public interference, corrosion caused by environmental exposure, or general wear and tear from deployment in traffic control environments.
Traffic control equipment is used in exposed roadside and worksite conditions and must be installed, handled, stored and maintained correctly. Corflute signs, sign frames and other accessories are not included unless expressly stated.
Warranty claims may require inspection, photos, proof of purchase and details of how the product has been used. Where a defect in materials or workmanship is confirmed, UAG Services will repair, replace or refund the product at its discretion.
- Curved traffic sign frame leg sold individually for portable temporary traffic sign frame setups
- SHS20x20x1.6 DuraGal steel construction with cold gal finished weld area
- 300mm vertical stem for fitting into compatible sign frame receivers
- Compatible with UAGS multi-message traffic sign frame setups
- Used to support roadside sign frames in advance warning, detour and worksite control layouts
- 1.7kg weight supports practical loading, handling and pack-down by traffic crews
- Curved leg ends assist placement on sealed surfaces, shoulders and prepared worksite areas
- Used across roadworks, utility works, civil construction and council maintenance setups
| Product Type | Curved traffic sign frame leg |
| Finish | DuraGal steel with cold gal finished weld area |
| Material | SHS20x20x1.6 DuraGal steel |
| Stem Material | SHS20x20x1.6 DuraGal steel |
| Total Width | 1110mm |
| Total Height | 520mm |
| Height to Bend | 220mm |
| Stem Length | 300mm |
| Weight | 1.7kg |
| Leg End Style | Bent or curved leg ends |
| Sold As | Individual leg |
| Compatibility | Compatible UAGS traffic sign frames |
| Application | Portable traffic sign frame support for temporary traffic management setups |
| SKU | Y-LEG-CURVED-DG |
| Brand | UAG Services |
| Shipping Weight | 2.5000kg |
| Shipping Width | 0.050m |
| Shipping Height | 0.600m |
| Shipping Length | 1.250m |
| Shipping Cubic | 0.037500000m3 |
Be The First To Review This Product!
Help other UAG Services users shop smarter by writing reviews for products you have purchased.
More From This Category
1200x300 Multi-Message Traffic Sign Frame Type 4
$30.00 ex.GST
260mm LED Traffic Marshalling Wand, Torch, Multi-M
$25.00 ex.GST
340mm LED Traffic Marshalling Wand, Multi-Mode
$35.00 ex.GST
450 mm Traffic Control Stop Slow Bat
$120.00 ex.GST
600x600 Multi Message Traffic Sign Frame Type 5
$30.00 ex.GST
More info