6W 180° Dimmable Amber LED Warning Light Head (Surface Mount)
More infoQuick Description
180° surface mount amber LED light head with selectable flash patterns, dimming function, and synchronisation capability for vehicle and plant warning systems.The U31-6A 6W 180° Dimmable Amber LED Warning Light Head delivers wide-angle amber warning output across a 180-degree spread, supporting vehicle-mounted warning systems where side visibility is required. It is used on service vehicles, traffic control utes, civil plant, and fleet applications to define vehicle presence when operating roadside, in work zones, or within active worksites.
This light head is installed as a surface-mounted unit using an aluminium bezel, allowing secure fixing to vehicle panels, trays, canopies, or plant bodywork. It is commonly mounted along vehicle sides or rear corners to extend warning coverage beyond forward-facing beacons or lightbars. Wiring is completed through a multi-wire setup including power, ground, and control wires for flash pattern selection, dimming, and synchronisation with additional light heads.
The unit operates across 10–30V DC systems and delivers multiple selectable flash patterns including single, double, quad flash, and steady burn modes. Flash patterns are controlled via the blue wire, allowing operators to cycle through patterns or reset to default. Synchronisation between multiple units is achieved by linking control wires, enabling coordinated flash sequences across the vehicle. A dedicated dimming function reduces output intensity when required for night operation or controlled environments.
The light head is constructed with a wide-angle lens and sealed housing to maintain consistent operation in exposed conditions. The aluminium bezel supports mounting stability, while the IP67 rating allows use on vehicles exposed to rain, dust, and washdown environments.
This unit meets ECE R65 Class 1, SAE Class 1, and ECE R10 requirements, making it suitable for compliant warning system setups across contractor fleets, council vehicles, and plant equipment operating within Australian worksites.
In real-world deployment, this light head is used as part of a multi-point warning system, positioned on vehicle sides, rear sections, or plant extremities to ensure vehicles remain clearly identifiable when entering, exiting, or operating within traffic-controlled environments.
(U31-6A)
UAGS Warning Light Warranty - 3-Year Limited Coverage
This product is imported and branded by UAG Services Pty Ltd, which acts as the manufacturer of this item for warranty purposes. It is covered by a 3-year limited warranty against defects in materials and workmanship under normal use.
This warranty does not cover normal wear and tear, weathering or UV degradation, accidental or impact damage, water ingress caused by damaged seals not reported at delivery, incorrect or unauthorised installation, unauthorised modification, or use outside the product's stated voltage and operating conditions. Installation should be carried out by a qualified auto electrician; damage caused by DIY wiring is not covered.
To make a warranty claim, contact UAG Services Pty Ltd (Gate 2, 7 Royan Place, Bayswater North VIC 3153) at [email protected] or (03) 8750 0926 with your order reference, a description of the fault and photos of the product. Claims are subject to inspection and approval. Where a defect is confirmed, UAG Services Pty Ltd will repair, replace or refund the product at its discretion. Return shipping costs are handled in accordance with the UAGS Returns Policy unless otherwise required under Australian Consumer Law.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided in addition to these rights and does not limit or exclude them.
- 6 x 1W amber LEDs
- 180° wide-angle lens for side visibility coverage
- Surface mount design with aluminium bezel
- Selectable flash patterns including single, double, quad and steady modes
- Synchronisation capability across multiple units (up to six)
- Dimming function for reduced output when required
- IP67 rated for outdoor and vehicle-mounted environments
- Multi-voltage operation (10–30V DC)
- Selectable flash patterns including ECE R65 compliant single, double and quad flash modes
- Includes steady burn and OFF mode
- Phase 1 and Phase 2 synchronisation capability
| Model | U31-6A |
| LED Configuration | 6 x 1W LEDs |
| Light Colour | Amber |
| Lens Type | 180° Wide Angle |
| Voltage | 10–30V DC |
| Current Draw | 0.83A @ 12.8V DC |
| Flash Patterns | Multiple patterns including single, double, quad, steady burn |
| Synchronisation | Up to 6 units |
| Dimming Function | Yes (via control wire) |
| Ingress Protection | IP67 |
| Compliance | ECE R65 Class 1, SAE Class 1, ECE R10 |
| Dimensions | 95mm x 26mm x 37mm |
| Mount Type | Surface mount with aluminium bezel |
| SKU | U31-6A |
| Barcode # | 2020124227945 |
| Brand | UAG Services |
| Shipping Weight | 0.0150kg |
| Shipping Width | 0.050m |
| Shipping Height | 0.050m |
| Shipping Length | 0.012m |
| Shipping Cubic | 0.000030000m3 |
| Unit Of Measure | ea |
Be The First To Review This Product!
Help other UAG Services users shop smarter by writing reviews for products you have purchased.
More From This Category
18W LED Warning Light Head | TIR Lens
From $80.00 ex.GST
3W Dual Colour Amber/White LED Warning Light Head
$40.00 ex.GST
E3 9W LED Warning Light Head
From $64.00 ex.GST
E4 12W LED Warning Light Head
From $60.00 ex.GST
F3 9W Mini LED Warning Light Head
From $80.00 ex.GST
