TM1-35C STOP HERE WHEN DIRECTED (1200x600mm) corflute sign panel instructs motorists to stop at a designated point when directed by a traffic controller. It is used in temporary traffic control setups where manual control is in place, allowing crews to safely manage vehicle flow through active work zones.

Manufactured from 6mm corflute board and faced with retroreflective white Class 1W full-cube prismatic sheeting with red legend, this panel provides clear visibility in both daytime and night-time conditions. The lightweight construction allows for efficient handling, installation and repositioning as site conditions change.

Designed for temporary traffic management applications, this sign complies with AS 1742 and AS 1743, with reflective performance meeting AS/NZS 1906.1 Class 1W, RTA NSW Class 1X and DTMR QLD Class 1X requirements. It is typically mounted within the Multi-Message Sign Frame No. 1, positioned to clearly define the stopping point for approaching vehicles.

In a standard traffic control sequence, motorists first encounter advance warning signage such as roadwork or lane condition signs, followed by this panel establishing the controlled stopping location. Traffic controllers then manage vehicle movement using stop/slow bats or signals. This sign is commonly deployed in lane closures, alternating traffic flows, mobile works and intersection control where vehicles must be held before entering the work area.

This type of sign is commonly specified in temporary traffic management plans prepared under AS 1742 to support safe and controlled vehicle movement through work zones. Available for pickup or shipping through UAGS.