OEX Single MIDI Fuse Holder (250A, 1–32V) is a single in-line MIDI fuse holder used to house a compatible MIDI fuse within suitable vehicle and auxiliary electrical systems. It is used as part of circuit protection layouts in work utes, fleet vehicles, service vehicles, traffic control vehicle fitouts, dual battery systems and auxiliary power systems where the supplied specifications suit the electrical system design.

The fuse holder is a surface mount and in-line component used within a suitable cable and circuit protection layout. It is commonly used with MIDI fuses, batteries, DC-DC chargers, battery isolators, circuit protection hardware and auxiliary power systems where the fuse type, voltage rating, current rating and mounting arrangement suit the vehicle setup.

The fuse holder does not interrupt current by itself. It houses a compatible MIDI fuse, which provides the circuit protection function when selected and fitted as part of a suitable electrical system. Final product selection must be based on the supplied product specifications, fuse type, electrical load requirements, vehicle setup, system configuration and installer assessment.

The holder is voltage rated from 1–32V with a maximum current rating of 250A. It has a 30mm mount centre-to-centre measurement and stainless steel studs.

This OEX single MIDI fuse holder is used in professional vehicle electrical fitouts where compact MIDI fuse protection hardware is required. It may be selected for suitable 12V or 24V vehicle electrical systems only where the voltage rating, fuse type, current rating, mounting arrangement and overall system design support its use.

MIDI Fuse Holder FAQs

What fuse type does this holder suit?

This holder is specified for compatible MIDI fuses.

What voltage rating does this fuse holder have?

The supplied voltage rating is 1–32V. System suitability should be confirmed against the full electrical setup and product specifications.

What is the maximum current rating?

The supplied maximum current rating is 250A. Fuse selection and circuit suitability must be determined by the installer based on the electrical load requirements and system design.

Does the fuse holder provide circuit protection by itself?

No. The fuse holder houses a compatible MIDI fuse. The fuse provides the circuit protection function when correctly selected for the system.

What should be confirmed before selecting this fuse holder?

Final product selection must be based on the supplied product specifications, fuse type, electrical load requirements, vehicle setup, system configuration and installer assessment.