ROADWORKS (1200x300mm) corflute sign panel identifies an active roadwork site and indicates that motorists are entering a temporary traffic control area. It is used in roadworks, civil construction, maintenance works and utility works where clear worksite identification is required as part of the traffic guidance setup.

Manufactured from 6mm corflute board and faced with retroreflective yellow Class 1W full-cube prismatic sheeting with black legend, this panel is suited to both daytime and night-time traffic control conditions. The lightweight construction allows for efficient handling, transport and repositioning across active worksites.

Designed for temporary traffic management applications, this sign complies with AS 1742 and AS 1743, with reflective performance meeting AS/NZS 1906.1 Class 1W, RTA NSW Class 1X and DTMR QLD Class 1X requirements. It is typically installed in the lower section of the Multi-Message Sign Frame No. 1, where 1200x300mm panels are used to reinforce the site condition or work activity message.

Within a standard traffic control setup, this panel is positioned after advance warning signage and used with upstream messages that establish the approaching work zone. It is commonly installed beneath signs such as Symbolic Worker  or alongside temporary conditions that identify the active work area before motorists pass through tapers, lane changes or controlled sections of roadway.

This type of sign is commonly specified in temporary traffic management plans prepared under AS 1742 to guide motorists safely through changing traffic conditions. Available for pickup or shipping through UAGS.