Road Work Ahead (600x900mm) corflute sign panel displays a black ROAD WORK AHEAD message on a yellow retroreflective background. It is used in temporary traffic management setups to provide roadwork advance warning information where this full-height 600x900mm panel is specified.

UAGS temporary traffic sign corflute panels are manufactured from 6mm UV stabilised corflute using Class 400T retroreflective yellow sheeting with opaque black printing. The black ROAD WORK AHEAD legend and yellow retroreflective background support roadwork advance warning messaging where this panel is specified.

This 600x900mm corflute sign panel is for Multi-Message Sign Frame No. 2 arrangements only. It does not fit Multi-Message Sign Frame No. 1. Multi-Message Sign Frame No. 2 holds two 600x900mm panels, with this panel typically paired beside a compatible 600x900mm Speed Limit Ahead panel, such as 40 Speed Limit Ahead or 60 Speed Limit Ahead, where specified for the traffic control arrangement.

In the standard frame arrangement shown for this type of setup, a 600x600 Road Work Ahead panel may be displayed above a 600x300 blank panel beside a 600x900 Speed Limit Ahead panel. This UAGS 600x900mm panel fills the full opposite side of Multi-Message Sign Frame No. 2 as one full-height Road Work Ahead panel, removing the need for a separate 600x300 blank panel in that frame position.

In practical use, this panel may be used for roadworks, civil works, maintenance works, utility works, traffic switches, changed road conditions, temporary lane arrangements and other temporary traffic management layouts where ROAD WORK AHEAD advance warning messaging is required.

This panel provides roadwork advance warning information only. It does not create, authorise or legally enforce a roadwork arrangement, temporary speed zone, speed limit, lane closure, traffic control arrangement or approved traffic management arrangement by itself. Selection, placement, panel pairing, visibility, frame arrangement, display timing and use remain subject to the applicable traffic control arrangement, site conditions, project requirements and relevant authority requirements.

Road Work Ahead 600x900mm Sign FAQs

What is the Road Work Ahead 600x900mm panel used for?

This panel is used to provide ROAD WORK AHEAD advance warning messaging in temporary traffic management setups where a full-height 600x900mm Road Work Ahead panel is specified for the frame arrangement.

Is this 600x900mm panel a verified national sign code?

No. No verified national sign code has been supplied for this exact 600x900mm full-height Road Work Ahead panel. It is supplied as a state-referenced / standard-derived panel.

What does the QLD MUTCD T1-Q06 reference mean?

QLD MUTCD Sign Code T1-Q06 is supplied as a Queensland state identification reference only. It must not be treated as a national code, road authority approval claim, mandatory use requirement or confirmation of site suitability.

Why is this panel 600x900mm instead of 600x600mm?

This product is a full-height 600x900mm Road Work Ahead panel for Multi-Message Sign Frame No. 2 arrangements. In the standard frame arrangement shown for this type of setup, a 600x600 Road Work Ahead panel may be displayed above a 600x300 blank panel beside a 600x900 Speed Limit Ahead panel. This UAGS panel fills that frame position as one full-height panel.

What frame does this panel fit?

This panel is for Multi-Message Sign Frame No. 2 arrangements only. Multi-Message Sign Frame No. 2 holds two 600x900mm panels.

Will this panel fit Multi-Message Sign Frame No. 1?

No. This 600x900mm panel does not fit Multi-Message Sign Frame No. 1. It is intended for Multi-Message Sign Frame No. 2 arrangements only.

What panel is this usually paired with?

This Road Work Ahead 600x900mm panel is typically paired beside a compatible 600x900mm Speed Limit Ahead panel in Multi-Message Sign Frame No. 2, such as 40 Speed Limit Ahead or 60 Speed Limit Ahead, where specified for the traffic control arrangement.

Does this panel remove the need for a 600x300 blank panel in Frame No. 2?

Yes, in this UAGS Frame No. 2 format, the full-height 600x900mm Road Work Ahead panel fills the opposite side of the frame as one panel. This removes the need for a separate 600x300 blank panel in that frame position.

What reflective sheeting is used?

This panel is supplied with Class 400T retroreflective yellow sheeting with opaque black printing. Reflective wording relates to the supplied signface material and printed signface construction only. Check project-specific reflective sheeting and signface requirements where applicable.

What material is this sign panel made from?

This panel is manufactured from 6mm UV stabilised corflute for lightweight temporary traffic sign use.

Does this panel create a complete traffic control arrangement by itself?

No. This panel provides roadwork advance warning information only. It does not create, authorise or legally enforce a roadwork arrangement, temporary speed zone, speed limit, lane closure, traffic control arrangement or approved traffic management arrangement by itself.

Should placement and panel pairing be checked before use?

Yes. Selection, placement, panel pairing, visibility, frame arrangement, display timing and use remain subject to the applicable traffic control arrangement, site conditions, project requirements and relevant authority requirements.