Heavy Duty Traffic Sign Y-Legs – DuraGal (2 Pack)
More infoQuick Description
Heavy duty DuraGal steel Y-legs supplied as a pair for supporting multi-message sign frames and boxed edge traffic signs in temporary traffic management setups.Availability Description
This BiPod Leg is part of our standard product line and is typically held in stock for immediate availability. In the event that this item is temporarily out of stock, please contact our sales team directly. These Legs are restocked quickly to ensure minimal delay in fulfilling your order.Heavy Duty Traffic Sign Y-Legs – DuraGal (2 Pack)
The Heavy Duty Traffic Sign Y-Legs – DuraGal (2 Pack) provide a durable and stable support solution for temporary traffic control signage. Commonly referred to as bipod legs or Y-legs, these steel supports are designed for use with multi-message sign frames and boxed edge traffic signs.
Manufactured from high-strength 25x25mm steel tube with a 20x20mm upright, these legs hold signage approximately 300mm above ground level. The wide Y-shaped stance improves stability in windy conditions and uneven ground commonly encountered on roadworks and civil construction sites.
Stronger 2.0mm Steel Construction
Unlike many traffic sign legs on the market that use 1.6mm wall thickness steel, UAG heavy duty Y-legs are manufactured from 2.0mm wall thickness SHS steel. This provides increased rigidity and durability when supporting traffic signs in windy conditions or demanding worksite environments.
The heavier gauge steel helps reduce flexing and improves long-term durability compared with lighter-duty sign legs commonly supplied in the industry.
The DuraGal steel finish provides excellent corrosion resistance without the need for paint, making these legs well suited for demanding outdoor environments where traffic control equipment is frequently transported, stacked and deployed.
Supplied as a 2-pack, the removable legs slot easily into compatible sign frames for quick installation and removal. Their simple design allows flat storage and efficient transport in traffic control vehicles.
Designed for professional traffic management crews and civil contractors operating across Australia.
| Feature | UAG Heavy Duty Y-Legs | Typical Market Legs |
|---|---|---|
| Steel Wall Thickness | 2.0mm | 1.6mm |
| Weight (per leg) | Approx. 2.1kg | Approx. 1.6kg |
| Durability | Heavy duty construction | Light duty construction |
| Rigidity | Higher rigidity, reduced flex | More flex under load |
| Worksite Performance | Better suited for demanding traffic control environments | Designed for lighter duty use |
(Y-LEG-GAL)
This product is covered by a limited warranty against defects in materials and workmanship at the time of delivery.
Temporary traffic control equipment is designed for use in demanding outdoor environments and is subject to heavy handling during transport, setup and removal. As such, this warranty does not cover damage resulting from normal wear and tear, bending, impact, overloading, misuse, improper installation, vehicle contact, environmental exposure, or modification of the product.
Sign legs, frames and stands are structural support components and may bend or deform if subjected to excessive force such as strong wind loads, vehicle impact, or incorrect setup. Such conditions are considered operational use and are not covered under warranty.
Warranty claims must be submitted within 30 days of purchase. UAG Services Pty Ltd reserves the right to inspect the product to determine whether the issue is due to a manufacturing defect.
Where a valid defect is confirmed, UAG Services will repair, replace or refund the product at its discretion.
- Heavy duty steel construction for demanding roadwork environments
- DuraGal finish provides corrosion resistance without paint
- Manufactured from 2.0mm wall thickness steel for increased strength
- Stronger and more rigid than common 1.6mm sign legs
- Wide Y-shaped bipod design improves stability in windy conditions
- Compatible with multi-message sign frames
- Suits boxed edge traffic signs
- Removable legs allow flat storage and transport
- Quick slot-in installation for fast setup
- Ideal for temporary traffic management and roadwork signage
- Product: Heavy Duty Traffic Sign Y-Legs
- Finish: DuraGal galvanised steel
- Pack Size: 2 legs
- Leg Design: Y-shaped bipod
- Steel Tube: 25 x 25mm SHS – 2.0mm wall thickness
- Upright Tube: 20 x 20mm – 300mm length
- Sign Height: Approx. 300mm above ground
- Dimensions (per leg): 1330mm (L) x 605mm (H)
- Weight: 2.1kg per leg (4.2kg per pack)
- Compatibility: Multi-message sign frames and boxed edge signs
| SKU | Y-LEG-GAL |
| Brand | UAG Services |
| Shipping Weight | 5.0000kg |
| Shipping Width | 0.600m |
| Shipping Height | 0.060m |
| Shipping Length | 1.350m |
| Shipping Cubic | 0.048600000m3 |
Be The First To Review This Product!
Help other UAG Services users shop smarter by writing reviews for products you have purchased.
More From This Category
1200x300 Multi-Message Traffic Sign Frame Type 4
$30.00 ex.GST
20W 3.9in LED Work Utility Light Euro Beam
$24.80 ex.GST
260mm LED Traffic Marshalling Wand, Torch, Multi-M
$25.00 ex.GST
340mm LED Traffic Marshalling Wand, Multi-Mode
$35.00 ex.GST
450 mm Traffic Control Stop Slow Bat
$120.00 ex.GST
