Detour Right TM5-1B(R) (1200x300mm) corflute sign panel provides clear right-direction guidance for motorists within temporary traffic management environments. It is commonly used to redirect traffic when a primary route is closed, restricted or temporarily changed due to active site operations.

The signface layout, arrow symbol, legend and colours are manufactured to follow the applicable AS 1743:2023 design specifications for the TM5-1B(R) guide/detour panel. This directional panel can be used in compatible 1200x300mm sign frames, including the 1200x300mm Double-Sided Traffic Sign Frame Type 4, or integrated as the lower directional panel within Multi-Message Traffic Sign Frame No. 1 arrangements.

UAGS temporary traffic sign corflute panels are manufactured on 6mm UV stabilised corflute (plastic flute board) using Class 400T full-cube prismatic retroreflective yellow sheeting. The bold black DETOUR text, directional right arrow and black border support strong legibility in daytime and low-light conditions. The lightweight construction is suited to efficient transport, vehicle loading and rapid site deployment across changing work zones.

This 1200x300mm panel may be deployed as a standalone detour directional marker in a compatible single-sided or double-sided frame where specified by the applicable TMP or TGS. It can be useful where traffic is being turned right from the normal route onto a temporary diversion, including side-road entries, temporary access routes and staged intersection changes.

When used as part of a larger detour sequence, the panel may support route decision points where drivers need to leave the existing path of travel and follow a right-turn detour. It may be used with advance warning, road closure, local traffic or additional detour guidance signs, depending on the applicable TMP, TGS, site conditions and authority requirements.

Selection, placement and use remain subject to the applicable TMP, TGS, project requirements, site conditions and relevant authority requirements. Available for pickup in Bayswater North or delivery Australia-wide.

Detour Right TM5-1B(R) FAQs

What is the Detour Right TM5-1B(R) sign panel used for?

It is used to provide right-direction detour guidance for motorists being redirected from a normal travel route onto a temporary diversion, side road, access route or changed traffic arrangement.

Can this panel be used as a standalone right-turn detour marker?

Yes. This 1200x300mm directional panel may be used as a standalone detour marker in compatible single-sided or double-sided 1200x300mm sign frames. It may also be used as the lower directional panel within compatible Multi-Message Sign (MMS) frame arrangements, where specified by the applicable TMP or TGS.

Where would this right detour panel commonly be positioned?

It may be positioned at intersections, side-road entries, temporary diversion points or staged access changes where motorists need to turn right to continue along the temporary detour route.

What reflective sheeting is used on this panel?

This panel uses Class 400T full-cube prismatic retroreflective yellow sheeting to support visibility in temporary traffic management environments. Older project documents, supplier references or road authority drawings may refer to Class 1, Class 1W, Class 1 WZ or similar reflective sheeting terminology for temporary roadwork signs.

Does installing this sign panel guarantee worksite compliance?

No. This sign panel is one component within a broader temporary traffic management arrangement. The selection, placement and sequencing of temporary signage must be determined by the applicable TMP, TGS, project requirements, site conditions and relevant authority requirements.