The B Class LED Arrow Board is a single-sided vehicle-mounted traffic control arrow board used to display directional information and caution displays in temporary traffic management environments. The board has been tested against AS 4192-2006 requirements by a NATA-accredited laboratory and confirms NSW RMS Specification FAS/5 Type Approved status.

The arrow board is designed as a vehicle-mounted rear-facing directional display and may be fitted to a suitable cabin rack, traffic control cage, tray headboard, tray-mounted traffic control racking cage, rear tray structure or other compatible vehicle mounting structure. Final fitment location depends on the vehicle, tray, cage, headboard and mounting structure used.

The single-sided B Class display measures 1500mm x 770mm and uses 15 LED clusters with Arrow Left, Arrow Right, Double Arrow and Caution display modes. The board has a 1545mm x 770mm mounting footprint, greater than 700 cd output as supported by supplied testing documentation, integrated light sensor for automatic dimming, short-circuit protection, fail-safe operation and solid-state circuitry.

The board uses a weather-resistant enclosure with a vented design to assist with internal air movement and condensation management.

The arrow board is supplied with mounting brackets, beacon brackets, a 12V DC electric actuator, in-cabin controller, swivel controller mount, 4-core power cable, controller cable, Deutsch connector tails, dual MIDI fuse holder and MIDI fuses.

The arrow board system is multi-voltage, with a 12V DC actuator supplied as standard and a 24V DC actuator available on request for suitable 24V vehicle systems. Required vehicle voltage should be confirmed before ordering.

The system is intended for integration into a suitable vehicle electrical setup and is typically powered through a dual battery setup where included in the vehicle fitout design. Vehicle fitment, installation, wiring beyond the supplied components and dual battery system integration are not included with this product.

Side beacons, work lights and additional warning equipment are sold separately. This listing is for the single-sided version, with the double-sided version available separately as AB-BCLASS-1500-30-D.

The board is assembled in Australia using locally manufactured structural components with imported electrical systems and actuator hardware. Australian assembly supports local quality control, compliance checking, serviceability and vehicle fitout integration for traffic control vehicle setups.

Product selection and use should still be checked against current project requirements, traffic management documentation, vehicle fitout requirements and applicable road authority conditions.

Frequently Asked Questions

What is included with this single-sided B Class LED Arrow Board?

This listing includes the single-sided B Class LED arrow board, mounting brackets, 12V DC actuator, in-cabin controller, controller swivel mount, 4-core power cable, controller cable, two 1500mm assembled Deutsch connectors with wire tails, dual MIDI fuse holder, two MIDI fuses and two beacon brackets.

Are side beacons or work lights included?

No. Side beacons, work lights and additional warning equipment are sold separately. Some vehicle fitout images may show additional equipment that is not included with this arrow board listing.

Can this arrow board be fitted to different vehicle structures?

Yes. The board may be fitted to a suitable cabin rack, traffic control cage, tray headboard, tray-mounted frame, rear tray structure or other compatible vehicle mounting structure. Final fitment depends on the vehicle, tray, cage, headboard and mounting structure used.

Is this arrow board rear-facing or rear-mounted?

The board is designed as a rear-facing directional display for approaching rear traffic. It does not have to be mounted only at the rear of the vehicle. Fitment location may vary depending on the vehicle setup and mounting structure.

Is this the single-sided or double-sided version?

This listing is for the single-sided version, model AB-BCLASS-1500-15-S. The double-sided version is available separately as AB-BCLASS-1500-30-D.

Does this arrow board suit 12V and 24V vehicle systems?

The arrow board is a multi-voltage system and is supplied standard with a 12V DC electric actuator. A 24V DC actuator is available on request for suitable 24V vehicle systems. Confirm the required vehicle voltage before ordering.

What standards or approval information is supplied for this board?

The board has been tested against AS 4192-2006 requirements by a NATA-accredited laboratory and confirms NSW RMS Specification FAS/5 Type Approved status. These claims should not be treated as national road authority acceptance, legal suitability or suitability for every project.

Does this product make a vehicle or traffic setup compliant?

No. This arrow board is one component used in temporary traffic management environments. Product selection, vehicle fitment and use should be confirmed against the supplied specifications, vehicle requirements, current standards, project requirements, traffic management documentation and applicable road authority conditions.

Is vehicle installation included?

No. Vehicle fitment, installation, wiring beyond the supplied components and dual battery system integration are not included with this product. Installation requirements should be confirmed against the vehicle, electrical system, fitout requirements and supplied installation documentation.