The U1-24(A)(C)AT 72W Amber LED Warning Beacon provides 360-degree hazard visibility for traffic control vehicles, civil construction fleets, and plant equipment operating in roadside and worksite environments. It is used to clearly identify vehicles during lane closures, mobile works, and site operations where consistent warning presence is required. This model is available with either an amber or clear outer lens, both delivering the same amber light output.

This beacon is installed using a fixed three-point mounting base with gasket, allowing secure attachment to vehicle roofs, trays, and plant cabins. It is suited to utes, trucks, service vehicles, and machinery where a permanent warning solution is required. Wiring is completed via standard positive and ground connections, with additional control wires for flash pattern selection and synchronisation across multiple units.

The unit delivers full 360-degree output using a multi-LED configuration with selectable flash patterns including rotating, single, double, and quad flash modes. Pattern selection is controlled through a dedicated wire, allowing operators to cycle through modes during setup. Multiple beacons can be synchronised to operate in unison or alternating sequences across a fleet or vehicle setup.

The housing incorporates an aluminium base with a replaceable polycarbonate lens, supporting ongoing use in exposed environments. Its sealed construction with IP67 protection allows operation in wet, dusty, and high-vibration conditions typical of civil works, traffic control, and heavy equipment applications.

This unit meets ECE R65 and SAE Class 1 requirements, making it suitable for compliant warning systems across contractor fleets, council vehicles, and plant equipment.

In real-world deployment, this beacon is commonly installed on traffic control utes, pilot vehicles, and civil machinery to provide continuous warning presence during active works, ensuring vehicles remain clearly identifiable when operating in live traffic environments.