Folding Traffic Sign Frame Leg | DuraGal
Quick Description
Folding traffic sign leg sold individually, made from DuraGal SHS steel with cold gal painted weld areas. Suits compatible multi-message frames and boxed edge traffic signs.Folding Traffic Sign Frame Leg Stands (Sold Individually) supports portable traffic sign frame and boxed edge sign setups used by traffic control crews, civil contractors, utility works crews and council maintenance teams. It is sold individually and used where temporary traffic signs need to be raised, positioned and packed down as part of a worksite traffic control setup.
The folding leg is fitted to compatible traffic control sign frames or boxed edge traffic signs during roadside setup. Once the sign is no longer required, the leg folds flat for loading, storage and transport in traffic control vehicles, racking cages or equipment storage areas.
The folding design supports repeated site setup and pack-down where crews are moving through advance warning areas, work zones, detours, access points and short-term traffic control layouts. It raises compatible signs approximately 360mm above ground, supporting practical roadside placement on sealed surfaces, shoulders and prepared worksite areas.
Manufactured from DuraGal steel with cold gal painted weld areas, this folding leg is suited to exposed traffic control environments where equipment is handled, stacked, transported and redeployed across multiple sites. The upright uses 20x20mm SHS with a 250mm length, while the leg section uses 25x25mm SHS for the ground support structure.
This leg is used with compatible UAGS sign frame setups, including these Traffic Control Sign Frames, and with suitable boxed edge traffic signs where a folding ground support leg is required.
Common use includes roadworks, utility maintenance, civil construction, council works and event traffic control where temporary signs need to be deployed, checked, relocated and packed down during the shift.
(Y-LEG-FOLD-DG)
UAGS Fabricated Steel Warranty - 2-Year Limited Coverage
This product includes a 2-year limited warranty from UAG Services Pty Ltd covering manufacturing defects in the welded steel fabrication, including structural integrity, welds and bends, under normal use conditions.
This warranty does not cover wear and tear, rubbing, scuffing or wearing of the cold galvanising paint or powder coat finish from normal handling, transport or storage, nor does it cover damage from misuse, impact, unauthorised modification or incorrect use.
To make a warranty claim, contact UAG Services Pty Ltd (Gate 2, 7 Royan Place, Bayswater North VIC 3153) at [email protected] or (03) 8750 0926 with your order reference, a description of the issue and photos of the product. Claims are subject to inspection and approval. Where a defect is confirmed, UAG Services Pty Ltd will repair, replace or refund the product at its discretion. Return shipping costs are handled in accordance with the UAGS Returns Policy unless otherwise required under Australian Consumer Law.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided in addition to these rights and does not limit or exclude them.
- Folding traffic sign leg sold individually for portable temporary sign setups
- DuraGal steel construction with cold gal painted weld areas
- Folding design supports compact storage, transport and pack-down
- Compatible with multi-message sign frames and suitable boxed edge signs
- Raises compatible signs approximately 360mm above ground
- Used for advance warning, detour, worksite access and temporary roadside sign layouts
- SHS steel construction suited to repeated handling and vehicle transport
- Used across roadworks, utility works, civil construction and council maintenance setups
| SKU | Y-LEG-FOLD |
| Product Type | Folding traffic sign leg |
| Finish | DuraGal steel with cold gal painted weld areas |
| Material | SHS steel |
| Upright Tube | 20x20mm SHS |
| Upright Length | 250mm |
| Leg Tube | 25x25mm SHS |
| Sign Height | Approximately 470mm above ground |
| Weight | Approximately 2.5kg |
| Sold As | Individual leg |
| Compatibility | Multi-message sign frames and suitable boxed edge traffic signs |
| Application | Portable traffic sign support for temporary traffic management setups |
| SKU | Y-LEG-FOLD-DG |
| Brand | UAG Services |
| Shipping Weight | 2.0000kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.050m |
| Shipping Length | 1.220m |
| Shipping Cubic | 0.006100000m3 |
Be The First To Review This Product!
Help other UAG Services users shop smarter by writing reviews for products you have purchased.
More From This Category
1200x300mm Double-Sided Traffic Sign Frame Type 4
$30.00 ex.GST
20W 3.9in LED Work Utility Light Euro Beam
$24.80 ex.GST
260mm LED Traffic Marshalling Wand, Torch, Multi-M
$25.00 ex.GST
340mm LED Traffic Marshalling Wand, Multi-Mode
$35.00 ex.GST
450 mm Traffic Control Stop Slow Bat
$120.00 ex.GST
More info